lasercspace
[Drivers]

Collaboration diagram for lasercspace:

The lasercspace driver processes a laser scan to compute the configuration space (`C-space') boundary. That is, it shortens the range of each laser scan such that the resultant scan delimits the obstacle-free portion of the robot's configuration space. This driver is particular useful for writing obstacle avoidance algorithms, since the robot may safely move to any point in the obstacle-free portion of the configuration space.

Note that driver computes the configuration space for a robot of some fixed radius; this radius may be set in the configuration file.

Standard laser scan

Corresponding C-space scan for a robot of 0.5 m

Compile-time dependencies

none

Provides

laser : output of the C-space scan

Requires

laser : raw laser data from which to make C-space scan

Configuration requests

PLAYER_LASER_REQ_GET_GEOM

Configuration file options

radius (length)
- Default: 0.5 m
- Radius of robot for which to make C-space scan
step (integer)
- Default: 1
- Step size for subsampling the scan (saves CPU cycles)

Example

driver
(
  name "sicklms200"
  provides ["laser:0"]
  port "/dev/ttyS0"
)
driver
(
  name "lasercspace"
  requires ["laser:0"] # read from laser:0
  provides ["laser:1"] # output results on laser:1
  radius 0.5
)

Author:: Andrew Howard

Last updated 12 September 2005 21:38:45

lasercspace [Drivers]

lasercspace
[Drivers]